Insulation, Mold Remediation & Property Services in Kingston, Washington

What We Do for Kingston and Kitsap County Properties

Nordic Properties And Insulation provides insulation installation, mold remediation, and property restoration throughout Kingston, Indianola, Suquamish, Port Gamble, and the greater Kitsap Peninsula. We’ve been serving local homeowners and commercial property managers since 2023, handling projects from crawl-space vapor barriers to full attic re-insulation and water-damage recovery.

Our crews work year-round in the Pacific Northwest climate, where the Washington State Department of Health reports that 45% of homes in coastal counties show measurable indoor humidity issues that can lead to mold growth (WA DOH Indoor Air Quality Program, 2023). We focus on moisture control first, then insulation performance, because the two systems work together in our marine climate.

Founder Pazelee Harvey-Eliason built the business around three principles: show up on time, explain the work in plain language, and leave the job site cleaner than we found it. Call us at (360) 605-0721 for a walkthrough and written estimate.

Insulation Installation and Upgrades

We install and upgrade insulation in attics, walls, crawl spaces, and rim joists using fiberglass batts, blown cellulose, and closed-cell spray foam. Each material has a specific use case, and we match the product to your building envelope, budget, and energy goals.

**Common insulation projects we handle:**

– Attic insulation to R-49 or R-60 (current Washington energy code for Zone 4C) – Crawl-space encapsulation with vapor barrier and closed-cell foam on foundation walls – Wall cavity dense-pack cellulose for older homes with no existing insulation – Rim joist air-sealing and spray foam (one of the highest return-on-investment upgrades per the U.S. Department of Energy) – Garage ceiling insulation for bonus rooms or living space above

We’ve completed insulation retrofits in homes built everywhere from the 1940s to last year. Older homes in Indianola and Rose Point often have zero wall insulation and maybe R-11 in the attic. Modern code calls for R-21 minimum in walls and R-49 in attics. That gap represents real heating cost every winter.

Before we install anything, we check for air leaks, roof leaks, plumbing leaks, and ventilation problems. Adding insulation over a moisture problem just traps the moisture and accelerates rot.

Mold Remediation and Moisture Control

We perform mold inspection, testing, containment, removal, and post-remediation verification following IICRC S520 standards. Most of our mold calls come from crawl spaces, attics, and bathrooms where ventilation failed or a leak went unnoticed for weeks.

Typical mold remediation process:

1. **Inspection and moisture mapping:** We use thermal cameras and pin-type moisture meters to find hidden water intrusion. 2. **Air and surface sampling:** Third-party lab analysis identifies species and spore count (we work with Air Quality Sciences in Tacoma for independent testing). 3. **Containment and negative air:** We isolate the work area with polyethylene barriers and HEPA-filtered negative air machines to prevent cross-contamination. 4. **Removal and cleaning:** HEPA-vacuuming, wire-brushing, media blasting, or material removal depending on substrate and contamination level. 5. **Antimicrobial application and encapsulation:** We apply EPA-registered products, then encapsulate porous surfaces that cannot be fully cleaned. 6. **Clearance testing:** Post-remediation air samples confirm spore counts have returned to normal baseline levels.

“We see a lot of crawl spaces in Kitsap County where the ground vapor is driving humidity up into the floor system,” says Pazelee Harvey-Eliason. “Once we encapsulate the crawl space with a sealed vapor barrier and condition the air, the mold problem upstairs usually stops recurring.”

The EPA estimates that 30% to 50% of structures in the U.S. have damp conditions that support mold colonization (EPA Mold Remediation in Schools and Commercial Buildings, 2023). In western Washington’s marine climate, that percentage runs higher.

Property Restoration After Water Damage

We handle water-damage restoration from leaking roofs, burst pipes, failed appliances, and storm intrusion. Our work includes water extraction, structural drying, demolition of unsalvageable materials, mold prevention, and coordination with insurance adjusters.

Water-damage timeline matters. According to the Institute of Inspection, Cleaning and Restoration Certification (IICRC), mold can begin growing on wet building materials within 24 to 48 hours. We prioritize rapid drying using commercial dehumidifiers, air movers, and moisture monitoring to keep structures in the safe zone.

We document moisture readings daily and photograph the drying process for insurance claims. Most carriers require detailed logs and before-and-after photos. We provide that documentation as part of every restoration project.

| Restoration Phase | Typical Duration | Key Equipment | |——————-|——————|—————| | Water extraction | 1-4 hours | Truck-mount extractors, wet vacs | | Structural drying | 3-7 days | LGR dehumidifiers, axial air movers | | Demolition of damaged materials | 1-2 days | Controlled tear-out, HEPA containment | | Antimicrobial treatment | 1 day | EPA-registered biocides, foggers | | Rebuild and finish | 1-3 weeks | Depends on scope |

We work throughout Kingston, Striebels Corner, Eglon, Woodway, and the Port Gamble Tribal Community. If you need water mitigation Kingston homeowners can count on, call (360) 605-0721 immediately. The first 24 hours determine whether you’re looking at drying costs or full mold remediation costs.

Why Local Property Owners Choose Nordic Properties

We’re a small business based in Kingston, and most of our work comes from repeat clients and neighbor referrals. Pazelee Harvey-Eliason started Nordic Properties And Insulation in 2023 after years in the construction trades, and we’ve built the company around accountability and clear communication.

What that looks like in practice:

– We return phone calls and texts the same day (usually within two hours). – We show up at the scheduled time or call ahead if we’re running late. – We write estimates in plain language with line-item costs, not lump-sum mystery numbers. – We carry general liability insurance and workers’ comp, and we pull permits when code requires them. – We protect your floors, furniture, and landscaping with drop cloths, floor runners, and plywood walkways. – We clean up daily and haul away all debris when the job is finished.

We also talk through options. If you’re deciding between spray foam and batt insulation, we’ll explain the performance difference, the cost difference, and the situations where each product makes sense. If your crawl space has minor mold and you’re deciding whether to DIY or hire a pro, we’ll give you an honest assessment of the health risk and the scope of work.

Our service area covers Kingston, Indianola, Suquamish, Rose Point, Eglon, Striebels Corner, Woodway, and the Port Gamble Tribal Community. We also take projects in Poulsbo, Silverdale, Port Ludlow, Bremerton, and Bainbridge Island when scheduling allows.

Get a Written Estimate for Your Property

We provide free written estimates for insulation installation, mold remediation, and water-damage restoration. Most estimates require a site visit so we can see the structure, measure the space, check for hidden problems, and give you an accurate price.

To schedule an estimate, call (360) 605-0721 or text the same number with your address and a brief description of the project. We’ll usually schedule a visit within two to three business days.

When we visit, we’ll:

– Walk the property with you and listen to your concerns. – Take photos and measurements. – Identify any code issues, safety hazards, or moisture problems. – Explain your options and answer questions in plain language. – Provide a written estimate with line-item costs, usually within 24 hours of the visit.

If you’re dealing with active water damage or a mold emergency, call immediately. We prioritize urgent situations and can often start mitigation work the same day or next day.

Nordic Properties And Insulation is licensed, insured, and based in Kingston, Washington. We’ve been serving Kitsap County homeowners and property managers since 2023.